60% Protex®/38% Cotton/2% Anti-static rib-stop fabric,240gsm
Zip closure on front
Two side pockets
Arc Rating ATPV 8.4cal/cm2,HRC 2
Fabric is available in:
1) 60% Protex®/38% Cotton/2% Anti-static,280g/sm
2) 98% Protex®/2% Anti-static,280g/sm
Color:High Visibility Yellow
FRVW07PC-C
60%Protex, 38%Cotton, 2%AS
Color | Hi Viz Yellow |
---|---|
Size | S, M, L, XL, 2XL, 3XL |
Standard | EN 1149-5:2008, EN ISO11611, EN ISO11612, EN ISO20471:2013+A1:2016, IEC61482-2 |
Activity | |
Country |
Standards
-
EN 1149-5:2008
This standard specifies the performance and requirement for anti-static, for materials and protective clothing. It covers clothing used as part of an earth system, to avoid incendiary discharge of static electricity. The requirements may not be sufficient in oxygen enriched flammable atmospheres. This standard does not apply to protection against mains voltages.
-
EN ISO11611
This standard is used with the intent to protect the wearer against the spatter (small splashes of molten metal), short-term electrical shock, accidental contact with live electrical conductors at voltages, and minimizes the possibility of short-term electrical shock and accidental contact with live electrical conductors at voltages. Class 1 is against less hazardous welding techniques and situations, causing lower levels of spatter and radiant heat. Class 2 is against more hazardous welding techniques and situations, causing higher levels of spatter and radiant heat.
-
EN ISO11612
Protective clothing to protect against heat and flame. This standard is describing minimum requirements for industrial workers exposed to heat. This means short contact with flame and with at least one type of heat (convective, radiant, large molten metal splashes or a combination of these). This standard also defines some minimum parameters that the fabrics have to comply with: tear resistance, tear strength, burst strength and seam strength.
-
EN ISO20471:2013+A1:2016
EN ISO20471:2013+A1:2016 is the harmonized European standard for high visibility clothing. It specifies the requirements for signaling the users presence during day or night time. High visibility clothing is grouped into three classes related to risk assessment.The performance class can be obtained using a single garment or a clothing ensemble, e.g. jacket and trousers.
-
IEC61482-2
IEC 61482 Protective clothing against the thermal hazards of an electric arc. EN61482-1-2:2007=Arc in the box test method Class 1=4ka Class 2=7ka EN61482-1-1:2009=Open Arc test method ATPV(Arc Thermal Performance Value) cal/cm2
Related products
Trousers
Trousers
Trousers
Trousers
Trousers
Trousers
Trousers
Trousers